首 页 | 关于我们 | 展会介绍 | 新闻中心 | 参展商手册 | 参展费用 | 展位分布图 | 展览回顾 | 媒体支持 | 联系我们 | ENGLISH
 新闻类别
展会资讯
行业新闻
公司动态
媒体报道
 新闻详细
     
Die Casting Safety Tips-The 19th Guangzhou Die-casting, Foundry & Industry Furnace Exhibition
2018年4月18日  压铸展-铸造展- Die-casting expo-foundry expo
---------------------------------------------------------------------------------------------------------------
    

If you are attempting die casting yourself, you must follow recommended safety protocols. The injury rate for people in the die casting industry is roughly twice that of other industries, so it is crucial to follow the necessary steps for the safe execution of the melting, casting, trimming, machining, and finishing processes that go with die casting.

Make Use of Safety Devices

Safety devices are an important way to protect operators from machine hazards. For example, a fixed guard provides a barrier that prevents people from reaching into a machine and crushing their hands.

These machines can interfere with visibility, but they may be worth it for the protection it provides.

Make Sure All Machines Are in Working Order

Before starting to work with die casting, it’s important to ensure all machines you’ll be using are clean, functioning properly and will not present any obvious threats to safety.

The time to find out that a machine is not functioning correctly is not in the middle of a production run.

Wear Protective Gear

You should wear appropriate protective gear (also called PPE – personal protective equipment) which includes safety glasses, ear protection, and safety shoes at all times when working on your die casting. Even if you are spending a short amount of time on the production floor, you need to wear your safety equipment.

It only takes a moment for a crippling accident to occur.

Pay Attention and Follow All Established Protocols

Most accidents are caused when someone loses focus or doesn’t perform a task as safety protocols recommend. Die casters are working with high levels of heat and molten metal, and it is very easy to get badly burned if you are not paying proper attention to what you are doing.

Read Provided Safety Information

NADCA, the North American Die Casting Association, provides extensive literature for your safety during die casting. This includes the General Safety Book and Safety Orientation for Die Casters, the NADCA Machine Safety Standard Safety Audit Checklist and Electrical Interface Report, the Safety Signage for Machines booklet and a variety of informative safety videos.

As a professional die caster or the manager of a die casting company, it is important to make sure you are fully versed in and follow all necessary safety procedures. 96 percent of injuries in the die casting workplace are caused by unsafe acts, meaning they can be avoided by staying focused and following proper safety procedures.

压铸展-铸造展-2018第十九届广州国际压铸、铸造及工业炉展览会-中国最受关注的压铸铸造展会-巨浪展览 -The 19th Guangzhou Die-casting, Foundry & Industry Furnace Exhibition -Die-casting exhibition, Die-casting expo,2018 Die-casting exhibition, 2018 Die-casting expo, China Die-casting exhibition, China Die-casting expo, Foundry exhibition, Foundry expo, 2018 Foundry exhibition, 2018 Foundry expo, Industry Furnace exhibition, Industry Furnace expo, 2018 Industry Furnace exhibition, 2018 Industry Furnace expo, China Industry Furnace exhibition, China Industry Furnace expo

版权所有 Copyright © 1996-2023  广州巨浪展览策划有限公司  粤ICP备05023181号
地址:广州市天河区珠江新城华明路29号星汇园A1座3A05-3A06室 邮编:510623  电话:0566-5036243 传真:020-38620781