CAMO edge fastening guides are part of a system designed to work specifically with CAMO Edge Deck Screws and CAMO Driver Bits. The screws are available in ProTech coated carbon steel and 316 stainless steel ¨C both ACQ compatible. Their reduced trimhead provides a less visible point of entry, and a star drive design offers more points of contact for better performance, while reducing bit slippage and wear. CAMO Driver Bits have a built-in shoulder that automatically sets the depth of drives to ensure maximum holding power and prevent over-driving. These bits are designed for use with solid, ungrooved deckboards. The CAMO Driver Bits for grooved boards have a higher shoulder for better depth when using grooved deckboards. CAMO does not typically require pre-drilling; however pre-drilling with a CAMO Pre-Drill Bit is recommended when installing hardwood with stainless steel fasteners.
With the CAMO® Marksman Pro®, users can quickly and easily deliver CAMO Edge Deck Screws into the edge of solid or grooved deckboards for fast installations. The Marksman Pro offers automatic 3/16 inch spacing. The Marksman PRO®-X1 was designed for installing wood decks and provides minimal 1/16 inch spacing. It can be used on both radiused and square edge boards. Both systems fit any nominal 6 inch deckboard (5¼ inches ¨C 5¾ inches). Designed for narrow boards, the Marksman PRO®-NB is ideal for boards measuring 3¼ inches to 5 inches and provides a 3/16 inch gap.
-The 18th China(Guangzhou)Int¡¯l Fastener
& Equipment Exhibition
|