Home AboutUs Exhibition
Info
News
Center
Exhibitor
Manual
Cost of
Participation
Floor
Plan
Exhibition
Retrospect
Media
Support
Contact Chinese
 News Type
Exhibition News
Industry News
Company News
Media reports
 New Detail
     
Uncertainty to Cloud Global Nickel Market Outlook in 2020 - Wood Mackenzie-The 21st China(Guangzhou)Int'l Stainless Steel Industry Exhibition
3/2/2020  - Stainless Steel Exhibition
---------------------------------------------------------------------------------------------------------------
    All eyes will be on the Indonesian nickel market in 2020. The knives may be out for the country’s nascent stainless industry but the staggering potential for expansion in NPI may reduce the impact of the nickel ore export ban to a minor inconvenience. Although the global battery sector share of nickel demand is much smaller than other metals, getting the quantity of nickel that EVs will need by the mid-2020s will remain a challenge. Wood Mackenzie Head of Nickel Mr Andrew Mitchel sees five key themes to watch in the global nickel market in 2020
Nickel sulphate premiums will switch to discounts
HPAL – plants come and go while delays mount in Indonesia
Chinese nickel pig iron stutters as Indonesian NPI expands rapidly
Indonesian stainless output stalls and may even fall
European stainless rebounds as imports from Asia are warned off

Mr Mitchell said “Despite continued investment in new battery plants, weaker demand for NiSO4 tied to last year’s cut in Chinese electric vehicle subsidies will translate to more discounts in 2020. We previously noted that premiums for NiSO4 might come under pressure due to stronger supply. While that did materialize, the unexpected and immediate mid-year downgrading in Beijing’s EV subsidy program had a greater impact. EV sales were reduced by half, China’s EV sales target of 1.5 million units was derailed and this cut demand for batteries and, therefore, precursor materials, including NiSO4. The impact will extend well into 2020. We anticipate further discounts on NiSO4 in 2020. It is even possible that some sulphate refiners will switch a portion of chemicals output back to metal production. The recent rush to make chemicals available will become more evident this year, as some western sources also fulfil their promises to satisfy specialist product demand from the EV sector. However, we believe the 27% surge in EV-related demand for nickel chemicals was exaggerated last year and that growth will be restricted to only 3-4% in 2020.”

Wood Mackenzie’s view comes despite the impressive pace of investment in new battery manufacturing facilities.

He said “Closure of the HPAL plant at VNC, New Caledonia, will contrast with the re-start at Ravensthorpe, Australia. However, challenges at three new HPAL complexes in Indonesia will progressively derail their commissioning schedules, says Wood Mackenzie. For now, we maintain our outlook for 22 kt nickel production at Vale’s VNC HPAL (high pressure acid leach) operation in New Caledonia in 2020. However, output may decrease from February-March once the company completes its review of the facility which has been losing, on average, US$9 million a month. At the same time, First Quantum Minerals aims to switch Ravensthorpe back on, having placed it on care and maintenance in 2017. We forecast production of 9 kt nickel in mixed hydroxide precipitate (MHP) in 2020, increasing to 20 kt in 2021. Thus, between them, these two operations could increase the availability to battery chemicals streams of nickel in MHP by 20-25 kt in 2020. Greater challenges may await the three new HPAL plants in Indonesia that are scheduled to enter production in 2021,” says Mitchell.

He said ‘The restart of the Indonesian nickel ore export ban will mean that, once ore stocks are depleted, Chinese NPI production will decrease sharply. However, this decline could be more than counter-balanced by expansion in Indonesian NPI. Even though the Indonesian nickel ore export ban began on 1st January, we expect about 6 Mt of Indonesian ore to arrive in China in the first part of this year. Concurrently, imports from the Philippines will be sustained at around 30 Mt. Combined with ore stocks already available in the country, we believe achievable nickel-in-NPI production in China is 526 kt, with monthly production levels expected to be sustained at 50 kt through the first half of 2020 before declining to 30 kt as ore supply becomes tighter. The potential future production of NPI in Indonesia is staggering. We currently anticipate output of 500-520 kt nickel in NPI in 2020 compared with 360 kt in 2019 as 18 RKEF lines became operational across three industrial parks. However, with Tsingshan’s intent to add a further 10 lines by 2021, and VDNi’s longer-term plan to build 35 more lines, then possible capability by the end of 2020 could be 660-800 ktpa, depending on the NPI grade. Thus, whatever happens to NPI productivity in China may ultimately prove inconsequential.”

He said “There are now two stainless steel melt shops in Indonesia Tsingshan Indonesia and Delong Obsidian. Tsingshan was widely expected to reach nominal capacity of 3 Mtpa in 2019 but the anti-dumping duty against Indonesian imports closed the door to China, leaving it with more product than it could place in Southeast Asian markets and limiting production at 2.2 Mtpa. “Delong Obsidian was completed late in 2019 and we assume that it will enter production in the first half of this year, melting around 300 kt over the year. While commissioning will give rise to an initial production of at least a few thousand tonnes, whether it remains operational for longer is open to debate - putting that 300 kt of new production at risk. On the presumption that Obsidian produces stainless flat products, slab and hot rolled coil, Delong will struggle to arrange offtake for any of its output. China is effectively closed because of the penalties against imports from Indonesia, while Tsingshan has already secured most other Southeast Asian destinations. Obsidian may struggle to make headway in a market where Tsingshan is now struggling to make further advances. Alternatively, Obsidian may cast billet rather than slab and produce stainless long products. One benefit of this option is that Obsidian would not compete directly with Tsingshan and Delong has already added LP rolling capacity in China. Unfortunately, LPs are also not exempt from China’s duties on Indonesian imports. However, there is a suggestion that if LP semis sent to China for rolling are then re-exported and are not for sale in the Chinese market - they would not be subject to duties. Focusing on LPs may be the most viable option for Obsidian if it is to sustain commercial activities beyond a short commissioning period. On the downside, the size of the LPs market is smaller and potentially unable to support its reported 1 Mtpa capacity.”.

He concluded “Europe will confirm anti-dumping duties on hot rolled stainless imported from China, Taiwan and Indonesia in 2020, thereby removing much of the threat posed by ex-region imports. Imports, chiefly from Southeast Asia and China, have taken a steadily increasing share of the European stainless steel market in recent years. Definitive safeguards put in place in 2019 eased that situation but imports still accounted for around 30% of the regional market in 2019. This, in combination with weakening demand, led to European stainless melt output decreasing by 8% in 2019. We forecast Europe’s stainless melt production rate to recover in 2020, with growth of 7.5%, or 500 kt, to 7.4 Mt. The ratification of anti-dumping duties on imported stainless HRC from China, Taiwan and Indonesia would aid this rebound. The investigation by the European Commission is due to finish in Q2 2020. If confirmed – which we expect will be the case – duties could be backdated to January 2020. Based on annualised trade data for January to October 2019, the new duties could reduce imports by 400 kt. With the European door closing, China’s stainless exports could fall by a further 250 kt, having already declined by an average 700 ktpa since mid-2018. This will place more pressure on the country’s current oversupply in stainless, which is precipitating cuts this quarter. 不锈钢展-2020第二十一届广州国际不锈钢工业展-The 21st China(Guangzhou)Int''l Stainless Steel Industry Exhibition - Stainless Steel exhibition,2020 Stainless Steel exhibition, China Stainless Steel exhibition, Guangzhou Stainless Steel expo,Guangzhou Stainless Steel exhibition, 2020 Stainless Steel expo, China Stainless Steel expo
Copyright © 1996-2023  JULANG.COM.CN Stone Rich Sight. All Rights Reserved
Add:Room 3A05-3A06,Building A1,Xinghui Park,Huaming Road 29,Pearl River New City,Guangzhou,510623,China